Resin drop problem...

Casper

Enthusiast
Joined
Nov 19, 2013
Posts
158
Reaction score
0
Location
Italy
Hello my friend..Finally, next saturday i'll have to get my viper..but...there is a problem...

yesterday i went to seller to check that the car was ready to retire....and i saw..under the soft top a couples of resin drop..Not resin air bubbles..but appears like hard drop glue falled there..At this point, i checked every square inch and i noted that there are other couples of resin under license plate (here in italy we have a large plate that cover trunk) and other smallest, in the hood (low side)..
Seller told me that this is a normal resin problem..after some year, it can happens...He calls this like a resin cancer..He told that now he use a fine scrubs and replace trasparent paint...

What do you think about?

i'm sad.... :...(
 

Indy

Enthusiast
Joined
Dec 24, 2009
Posts
639
Reaction score
0
Location
Vancouver
Take some pics and show us what you mean. Is it just drops of resin glue? OR maybe tree sap? Don't take off the clearcoat if it's just something on top of the paint, otherwise you need to repaint....if the bubbles are under the clearcoat, then it is something many Vipers have. I heard the moisture from the molding process was trapped beneath the paint and could not evaporate through it, forming bubbles....
 
OP
OP
Casper

Casper

Enthusiast
Joined
Nov 19, 2013
Posts
158
Reaction score
0
Location
Italy
i have no pics now.. You can imagine trasparent half sphere..When i saw them, i thinked that was wet drop..I pass my hand to dry it..but they was hard..They appear like "fake rain drop". They are no steel grey coloured (car is steel grey) but trasparent like water.. I told him that is tree sap...but he told me that is not from tree but from inside...
Today he called me and he tried to polish and make teflon treatment but drop removing has formed a little crater on the trasparent paint..
Now i think that he'll use finest sandpaper on all body and replace trasparent paint..
 

Indy

Enthusiast
Joined
Dec 24, 2009
Posts
639
Reaction score
0
Location
Vancouver
Is he taking off the clearcoat and getting it resprayed? Sounds a bit strange to me? Is he actually doing the work himself or having a professional body shop do the work. If he starts to polish away the clearcoat or even use sandpaper without having any experience with paintwork, I would be very worried.

I know many GTS Vipers have the same issue around the gas cap....bubbles in the paint, but the only way to fix them is a respray of the area.
 
Last edited:
OP
OP
Casper

Casper

Enthusiast
Joined
Nov 19, 2013
Posts
158
Reaction score
0
Location
Italy
oh, he is a car tuner, seller and he has professional team for paint. Maybe i'm too anxious..but i can't understand about this drop..


Had gts trasparent bubbles or paint bubbles?
By the way they appear like drop..
 

Camfab

Enthusiast
Joined
Oct 2, 2004
Posts
2,915
Reaction score
3
Location
SoCal
I've seen tiny micro bubbles, created by the resin degassing. I'm talking smaller than a pinhead. They can be color sanded out. What your describing sounds like a repaint of a repair, but you never know.
 
OP
OP
Casper

Casper

Enthusiast
Joined
Nov 19, 2013
Posts
158
Reaction score
0
Location
Italy
You must be registered for see images attach


i'm sick..
 
OP
OP
Casper

Casper

Enthusiast
Joined
Nov 19, 2013
Posts
158
Reaction score
0
Location
Italy
You must be registered for see images attach


i'm sick PART II
 
OP
OP
Casper

Casper

Enthusiast
Joined
Nov 19, 2013
Posts
158
Reaction score
0
Location
Italy
Car was ready to retire last week...i saw her with my eyes...For a couple of s*$t drop...
Maybe is better do it..Viper will be like a new car from factory...

i love you my forum friends..I'm very sad...
 

daveg

Enthusiast
Joined
Dec 26, 2006
Posts
335
Reaction score
18
Location
Mass...
All that for a few imperfections? looks like they are painting the entire car?
 

Dom426h

Enthusiast
Joined
Oct 26, 2007
Posts
2,632
Reaction score
0
Location
DE
My B/W GTS has several little bubbles on the front of the clamshell hood near the headlights. Ive seen them on others as well. Add to that the slight wavynes of the paint and being able to actually faintly see the fiberglass flakes under the paint on the roof under certain lighting. All normal parts of an old fiberglass car. Have you seen older vettes with original paint?

I personally wouldnt think to repaint over the natural character of the car unless imperfections were really bad. I do see how some might prefer a respray to achieve a "show quality" finish though.
 

daveg

Enthusiast
Joined
Dec 26, 2006
Posts
335
Reaction score
18
Location
Mass...
My B/W GTS has several little bubbles on the front of the clamshell hood near the headlights. Ive seen them on others as well. Add to that the slight wavynes of the paint and being able to actually faintly see the fiberglass flakes under the paint on the roof under certain lighting. All normal parts of an old fiberglass car. Have you seen older vettes with original paint?

I personally wouldnt think to repaint over the natural character of the car unless imperfections were really bad. I do see how some might prefer a respray to achieve a "show quality" finish though.
Ya, if I were you, I would keep the flaws on your B/W... Proves car hasn't been repainted!!! Especially on the hood!
 

Indy

Enthusiast
Joined
Dec 24, 2009
Posts
639
Reaction score
0
Location
Vancouver
Maybe is better do it..Viper will be like a new car from factory...
If you don't have to pay any extra, it will definitely be for the better. Might as well get a perfect car. Keep us updated with any progress. cheers!
 

viper k

Enthusiast
Joined
Feb 20, 2008
Posts
963
Reaction score
1
i agree if you dont have to pay get it painted and have a perfect viper at some point we will all get ours vipers painted if you drive them at all !!!!
 

viper k

Enthusiast
Joined
Feb 20, 2008
Posts
963
Reaction score
1
if your buying your viper thinking you will make money by not repainting it forget it unless its brand new !!!!!
 
OP
OP
Casper

Casper

Enthusiast
Joined
Nov 19, 2013
Posts
158
Reaction score
0
Location
Italy
i'll have not to pay extra..It wasn't a money problem but i worried because i understood what was this drops, hoping that this bobbles will not born again in future. Seller told me about "resin's mushroom" but i don't believe it..and i wouldn't appear like a gullible person with him..
Imho this is tree resin..because when i saw this viper the first time some months ago, i don't remember this problem..and it's not possible that i didn't see..
 

Camfab

Enthusiast
Joined
Oct 2, 2004
Posts
2,915
Reaction score
3
Location
SoCal
So you didn't want it repaired, but he is doing it anyway? Your still going to buy the car?
 

daveg

Enthusiast
Joined
Dec 26, 2006
Posts
335
Reaction score
18
Location
Mass...
Not repainting something proves there was at least no prior damage!! This refers to my post #16.
 
OP
OP
Casper

Casper

Enthusiast
Joined
Nov 19, 2013
Posts
158
Reaction score
0
Location
Italy
mmm it is difficult for me explain the situation because i'm italian..
I try to summarize.

I saw this viper some months ago. I bought her but before to retire, i asked to apply stripes, paint wheels and other little changes.

Tomorrow i could retire but some days ago, i went to seller and i saw this little imperfection that i had not see before.. Dialer tried to polish body to eliminate this little drops but this work has been not good..Then, he decided to replace trasparent paint in large part body for deleted every little defect.
 
OP
OP
Casper

Casper

Enthusiast
Joined
Nov 19, 2013
Posts
158
Reaction score
0
Location
Italy
Not repainting something proves there was at least no prior damage!! This refers to my post #16.

i know..you are right...but he made without advise me before...He thinked to make me a good job..By the way he had replace only trasparent, not color paint.
 

daveg

Enthusiast
Joined
Dec 26, 2006
Posts
335
Reaction score
18
Location
Mass...
Hello fellow Pisan, I was referring to Dom's post.. Sorry for the confusion... Yes, if you are not happy with those imperfections and they are noticeable, they should be taken car of to your satisfaction. If that requires paint work.. I say go for it...I hope the car serves you well... I know you will enjoy it once you receive it...
 

daveg

Enthusiast
Joined
Dec 26, 2006
Posts
335
Reaction score
18
Location
Mass...
Hi Casper,
Yes, half of my family Is from Bologna and the other half is from Sicily.
Enjoy your Viper, they are great cars!!!!
 

Members online

Forum statistics

Threads
153,139
Posts
1,681,566
Members
17,640
Latest member
SDViper
Top