Official Exhaust Clip Thread!!!

V

Vipuronr

Enthusiast
Joined
Apr 26, 2008
Posts
2,699
Reaction score
0
Giving the car to Chuck to install, but thanks for the advice!

Also, here are a couple of shots of the muffler delete:

You must be registered for see images attach


You must be registered for see images attach


And, yes this was before I detailed the car for a show!
 
Last edited:
V

Vipuronr

Enthusiast
Joined
Apr 26, 2008
Posts
2,699
Reaction score
0
Thanks! Chuck's work is always first rate!:2tu:

Wanted to try muffler delete with small bullet resonators, to see if I liked it...has a nice deep tone. Also, since I was always planning to add hi-flow cats, thought it might provide just enough "muffling" to keep it from being too loud. Without headers and sticking to the 2 1/2 pipe diameter, shouldn't be "overly" loud. Of course, too loud is in the "ear" of the listener/driver.:eater:

Besides, for me (being conservative) I like to do things in stages. I can always switch out the muffler delete for a different catback system...Corsa seems to be pretty popular.
 
V

Vipuronr

Enthusiast
Joined
Apr 26, 2008
Posts
2,699
Reaction score
0
Found this on YouTube, comparing '99 GTS before/after some exhaust work:

Before:Stock Headers, Stock Cats, Corsa Cat-Back:
[media]http://www.youtube.com/watch?v=yxmpbTorL4I&feature=related[/media]

After:Balenger Headers, Hi-Flow Cats, Corsa Cat-Back:
[media]http://www.youtube.com/watch?v=uZ2fMhDBbus&feature=related[/media]

Not sure who's car this is, but it sounds nice!
 
V

Vipuronr

Enthusiast
Joined
Apr 26, 2008
Posts
2,699
Reaction score
0
One of my favorite Viper sound clips. And I did manage to locate another in his garage and then a closeup of all the carbon fiber added...and its lots!

At Sean's shop:
[media]http://www.youtube.com/watch?v=5y0zEXHmcOU&feature=related[/media]

In his garage:
[media]http://www.youtube.com/watch?v=n3VTtWLJ398&NR=1[/media]

Look at all his carbon fiber:
[media]http://www.youtube.com/watch?v=p70qWdr5d9c&feature=related[/media]

Finished coming out of his garage: (different wheels, but pretty sure same car):
YouTube - 1993 Dodge Viper RT/10 Roe SC/MOS/****
 
V

Vipuronr

Enthusiast
Joined
Apr 26, 2008
Posts
2,699
Reaction score
0
This is the last sound clip for the '93 RT/10 Roe SC...LOUD exhaust...with a great idle. Changed his wheels from the black to later Gen II:

[media]http://www.youtube.com/watch?v=aRZO_wDhL0Q[/media]
 
S

Shotgun Willie

Viper Owner
Joined
Jun 21, 2006
Posts
9
Reaction score
0
Location
Racecarville
4" exhaust from headers into 5" tips, I use turbos to keep it quiet. Will get a video of it up soon.

[media]http://i238.photobucket.com/albums/ff277/cypressgts/AMERICANRACINGTECH2-1.jpg[/media]
 
PS78

PS78

Enthusiast
Joined
Nov 12, 2004
Posts
349
Reaction score
0
Location
UK
vancouver-gts said:
You guys like to hear some exhaust sounds ? ;)Here we go. I start my twin 377's and my buddy starts his twin 600 S/C Fountain .

[media]http://www.youtube.com/watch?v=k2DidP31-SA[/media]

Here's the ultimate sound ,my friend's twin 1550 HP engines with dry exhausts:2tu:

[media]http://www.youtube.com/watch?v=L-0ImeDz40c&feature=related[/media]

YouTube - Terrys 42 Outerlimits with Sterling 1550s opening up
Click to expand...

:2tu:
hehe i raise you:

P1 Powerboat testing 9 feb 08 Bournemouth video by zedsump - Photobucket

P1 Powerboat testing 9 feb 08 Bournemouth pt2 video by zedsump - Photobucket

P1 Powerboat testing, Bournemouth Bay, Spring 2008 pt.3 video by zedsump - Photobucket

Spec:
The Boat - Team Honey Party, P1 Powerboat Team, P1 Powerboat Championship">
P1 Powerboat testing, Bournemouth Bay, Spring 2008 pt.3 video by zedsump - Photobucket

Spec:
The Boat - Team Honey Party, P1 Powerboat Team, P1 Powerboat Championship">
P1 Powerboat testing 9 feb 08 Bournemouth pt2 video by zedsump - Photobucket

P1 Powerboat testing, Bournemouth Bay, Spring 2008 pt.3 video by zedsump - Photobucket

Spec:
The Boat - Team Honey Party, P1 Powerboat Team, P1 Powerboat Championship">
P1 Powerboat testing, Bournemouth Bay, Spring 2008 pt.3 video by zedsump - Photobucket

Spec:
The Boat - Team Honey Party, P1 Powerboat Team, P1 Powerboat Championship">
P1 Powerboat testing 9 feb 08 Bournemouth video by zedsump - Photobucket

P1 Powerboat testing 9 feb 08 Bournemouth pt2 video by zedsump - Photobucket

P1 Powerboat testing, Bournemouth Bay, Spring 2008 pt.3 video by zedsump - Photobucket

Spec:
The Boat - Team Honey Party, P1 Powerboat Team, P1 Powerboat Championship">
P1 Powerboat testing, Bournemouth Bay, Spring 2008 pt.3 video by zedsump - Photobucket

Spec:
The Boat - Team Honey Party, P1 Powerboat Team, P1 Powerboat Championship">
P1 Powerboat testing 9 feb 08 Bournemouth pt2 video by zedsump - Photobucket

P1 Powerboat testing, Bournemouth Bay, Spring 2008 pt.3 video by zedsump - Photobucket

Spec:
The Boat - Team Honey Party, P1 Powerboat Team, P1 Powerboat Championship">
P1 Powerboat testing, Bournemouth Bay, Spring 2008 pt.3 video by zedsump - Photobucket

Spec:
The Boat - Team Honey Party, P1 Powerboat Team, P1 Powerboat Championship
 
Last edited:
PS78

PS78

Enthusiast
Joined
Nov 12, 2004
Posts
349
Reaction score
0
Location
UK
Fatboy 18 said:
HOY, THEY DONT COUNT :buttkick:

Were supposed to be talking about Viper exhausts ;)
Click to expand...

Sorry Captain...shall i put my de-cat, de-cat-back video back up again instead then?

ps did you watch those vids above, infact all of these on this thread, with your computer plugged into a big hifi??? it's the only way!!!! V10 rocks (or twin s/c'd V8s above :D :headbang:
 
V

vancouver-gts

Viper Owner
Joined
Jan 19, 2010
Posts
1,042
Reaction score
0
Location
Vancouver BC
Yeah Zed , awesome sounds:2tu: . All I can see it's a canopy boat ,but can't make out the make because it's too far in the video.
BTW these are the Sterlings in my friend's boat . 1550 HP ea >
You must be registered for see images
 
V

Vipuronr

Enthusiast
Joined
Apr 26, 2008
Posts
2,699
Reaction score
0
While I do think the Sterlings sound great, and wish my boat sounded a bit like that, I agree with Fatboy...let's try to keep it to Vipers. I'm never going to put a Sterling motor in my RT, last I looked the RT didn't float (or even go in the rain), so I'd prefer to hear the de-cat, de-cat back sound clip! :D
 
V

Vipuronr

Enthusiast
Joined
Apr 26, 2008
Posts
2,699
Reaction score
0
Anyone have a sound clip of Roe hi-flows with cat-back or muffler delete and no headers? Prefer rear exit as opposed to side pipes if possible.

Thanks much!:2tu:
 
E

eucharistos

Enthusiast
Joined
Feb 15, 2008
Posts
6,845
Reaction score
2
Location
Houston
Vipuronr said:
Anyone have a sound clip of Roe hi-flows with cat-back or muffler delete and no headers? Prefer rear exit as opposed to side pipes if possible.

Thanks much!:2tu:
Click to expand...

my set-up but with x pipe (stock headers):
post # 90 this thread

eucharistos said:
my 1st video on the forum :kazoo:

roe high flows, stock resonators, muffler delete w/ magnaflow x-pipe (as mentioned in another thread, i'd use the cherry bomb x-pipe next time)

not refined, but i like it :drive:

2fe5a6fe.flv video by AmTorque - Photobucket
Click to expand...

this is not the best recording, it sounds much better in person
 
V

vancouver-gts

Viper Owner
Joined
Jan 19, 2010
Posts
1,042
Reaction score
0
Location
Vancouver BC
My 99 GTS sounds pretty good with OEM header , cat , resonator and free flow s/s Magnaflow mufflers. Would love to hear it with cat delete or high flow cat . Until spring when I'll replace the OEM cat with a high flow one ,I'll have to wait for a sound clip of my own :smirk:
 
V

Vipuronr

Enthusiast
Joined
Apr 26, 2008
Posts
2,699
Reaction score
0
Plum, that's what I thought...I like CF but not everywhere you look, as it kind of takes away the uniqueness! Not to mention the amount of money spent for all that CF when could be invested in other performance mods!:D

By the way, did you go to the OCC event two years ago? I sort of remember someone commenting on how great (loud) your car was! Was that you?
 
Last edited:
V

Vipuronr

Enthusiast
Joined
Apr 26, 2008
Posts
2,699
Reaction score
0
Reason I'm asking to hear other Gen II's with hi-flows and no headers, is I already have my hi-flows from Sean but won't be putting them in til spring...I'm a bit antsy, so want to hear what it will sound like.:eater:
 
V

Viper4Christ

Enthusiast
Joined
Jun 17, 2005
Posts
245
Reaction score
0
Location
USA
Vipuronr said:
Anyone have a sound clip of Roe hi-flows with cat-back or muffler delete and no headers? Prefer rear exit as opposed to side pipes if possible.

Thanks much!:2tu:
Click to expand...

Nice clips in this thread but I think this one takes the cake...

[media]http://www.youtube.com/watch?v=pFr7EptINqc[/media]
 
D

dodgefever

Enthusiast
Joined
Jan 1, 2007
Posts
392
Reaction score
0
Location
Currituck, NC
The first video is of the car at idle. Details are... 99 GTS, Random Tech Cats, Random Tech exhaust, stock manifolds, resinator delete, roller rockers.



The next is an interior sound video of a second gear 30 to 60 MPH acceleration with the windows up so you can get an idea of interior sound level with the Random Tech exhaust.


I see a red X shows up, but click it anyway, the link works for me.
 
C

Camfab

Enthusiast
Joined
Oct 2, 2004
Posts
2,915
Reaction score
3
Location
SoCal
My car................



[media]http://www.youtube.com/watch?v=Q2fxU4Xny2k[/media]
 
V

Vipuronr

Enthusiast
Joined
Apr 26, 2008
Posts
2,699
Reaction score
0
Camfab, sounds awesome...great "lumpy" idle!

So, (high level), what mods have you done...cam (obvious) but which one, heads, what else!

Thanks for posting.:2tu:
 
You must log in or register to reply here.

Similar threads

M
Gen 1 Audio Upgrade Thread.
Replies
24
Views
8K
maverickagm
M
J
WTB: Gen4 Exhaust
Replies
2
Views
5K
jeeplaw
J
J
Any 3rd Gens running 4th Gen Exhaust Muffler/Resonators?
Replies
8
Views
8K
MoparMap
MoparMap
N
Rattling and imbalance on the engine
Replies
12
Views
7K
99RT10GTS
99RT10GTS
0
Exhaust Sounds Different On Each Side
Replies
1
Views
5K
Old School
Old School

Latest posts

Members online

Total: 880 (members: 10, guests: 870)

Forum statistics

Threads
153,217
Posts
1,682,051
Members
17,711
Latest member
techanvi

Share this page

Top