Search results

  1. F

    roe blower and more for sale

    i am selling my roe blower. put down 796rwhp and 848rwtq on blower only. with nitrous put down over 1000 rwhp and 1200 rwtq.i have 6lb 7lb 10lb and 12 pd pulleys. i aslo have 65lb injectors. all software upgrades on vec2. polished blower -best offer b&b 1 3/4 jet hot coated headers...
  2. F

    comp coupe seats in gen 2

    i sat in marko's compe coupe(mopar sponsored white and blue) at a track event, and found it to have very good support for racing. i feel the stock seats have to much play in them. does anyone know if the compe coupe seats will fit in a gen 2 rt/10? or what other seats give good support for racing.
  3. F

    Mopars @ the Strip drag racing in Las Vegas april 1-2-3.

    anyone coming to vegas for this event???
  4. F

    anyone use torco as a fuel additive?

    with 76 gas stations dropping the race gas from there stations, i am going to try torco. all the vette guys here are using it with good results. 64 ounces of torco mixed with 18 gallons is supposed to get you an octane rating of 100 or so. anyone using torco?
  5. F

    760rwhp 770rwtq roe blown xcreampuffx

    dynoed my 2001 YELLOW rt tues and got some pretty good numbers. 760.57rwhp and 770.4 rwtq in vegas. temperature was 105 degree's outside but 94.86 in the shop @ 2200ft. mods are roe racing blower with a 2.5 inch pulley, elite intake system, 70mm tb's, heads flowing 296cfm, cam, gts-r timing...
  6. F

    finally complete: xcreampuffx motor build.

    just got my new motor in the car this week on a 01 rt. went with carrillo rods, je pistons, billet main caps, gts-r timing chain and new cam compatable to my roe supercharger(along with my water/meth injection). i also put on a set of heads that flow [email protected] lift. with the new rods and...
  7. F

    anyone know stock cam #'s and best cam to use?

    anyone know stock cam #\'s and best cam to use? i know the stock cam #'s from a previous post, but what is the conversion @ fifty thousandth lift and duration #'s for a 97 or 99 cam? what should the #'s look like for the best blower cam? does bigger exhaust #'s at lift and short duration sound...
  8. F

    anyone have a trashed head they want to sell cheap?

    looking for a head for a gen 2 to do some testing with. any condition is fine.
  9. F

    water methanol injection installed

    i went up to utah thursday to get utah viper's methanol water injection system installed. todd gave me a ride in his car and the system was very impressive. we were driving around and his intake temps rose to as high as 210-220. just from hitting his purge his temp would drop at least 50 degrees...
  10. F

    how much power with 7lb on roe blower?

    what are some power numbers you can expect with a roe blower with 7lbs of boost? mods are 70mm tb-1.7 t&d-catless-corsa and elites cold air intake system(much better than the vipair so its more than the 50 hp seat of the pants than the vipair).
  11. F

    which rods & pistons are the best to upgrade creampuff?

    i want to get forged internals on my creampuff. i have all the bolt ons and the roe blower on the car and need to get a head job and forged pistons and rods. what are the best pistons and rods to use? i am going to have some valves made also so who has the best valves so i can compare...
  12. F

    most power with blower and stock motor?

    who's car is putting down alot of power on the stock motor with a supercharger? i was just wondering what the creampuffs are putting down compared to the forged guys.
  13. F

    who needs a set of ccw purner with ET STREETS and skinnies?

    i have a set of purners 16" with et streets (new with 10 runs on them) and skinnies up front. i did get 1.51 60 foot times with this set-up. i know you could get 1.4 or better with a better launch. reason for selling is i stopped drag racing. dropped my times by 1.3 seconds in a 1/4 mile with...
  14. F

    who needs 655rwhp 905rwtq? i got the kit for you.

    selling my btr nitrous gas propane kit. the kit was on my 2001 viper. i also added remote opener for the nitrous(nx) and a nos remote opener on the propane. activating the 2 openers-2 bottle warmers- activation switch and purge, i have the nx 3 pod switch. no cutting needed for the 3 pod switch...
  15. F

    two stage nitrous system

    i want to do a 2 stage nitrous system but can't decide if the nos progressive system or the nx one is better. my a/f goes below 10:1 after 4250 rpm. so i was thinking of shooting some xtra n2o at that point. wish nos or nx would make a rpm based controller instead of a time based one. with the...
  16. F

    please post pics of rollbars rt/10

    i need to put a 6 pt. rollbar in my rt/10. searched for rollbar pics but did not find any that were installed. could only find pics of the gts rollbar. can anyone with the autoform roll bar installed in there rt please post some pics and pics of mounts. thanks.
  17. F

    anyone need a vec1 ?

    have a vec1 i am not using right now. anyone need one for half price pm me.
  18. F

    Need pics of viper racing suits.

    i need some pics of viper racing suits. i looked through past posts trying to find the pic of the bobby archer team(the lady racer) can't seem to locate it. if anyone has a kool pic of some racing suits or jackets please post them. thanks.
  19. F

    joined the 10 second club

    track in vegas opened today. temperature was 70 degrees with a 20 mph head wind at the track. man must have been 250 cars out for the first test and tune. first run was a warm up on motor. second run ran 10.86et @126.98. finally glad to beat last years 11.02 @129.7. know i can get deeper in the...
  20. F

    2001 dyno sheets

    wanted more power from my viper previously with the Btr nitrous propane system dynoed at 597rwhp 760rwtq. i then upgraded to the nitrous propane gas setup that tom offers. after getting it on the dyno and jetting it properly it makes some nice power. 655RWHP and over 900rwtq. ps.thanks tom...
  21. F

    What would you do?

    may be a dumb question but if you don't trust the reliability why are you buying the car?????
  22. F

    dyno running too rich

    just got back from the dyno.car was not making as much power as before running too rich. what can i do to lean out the car? i am running my vec at -20high and 0 low. when i dynoed 4 months ago it ran perfect with the settings at -20 and +6 but cant figure out why it is suddenly running rich. did...
  23. F

    new differential, rocking motion

    new rear end installed and since the install i am feeling a rocking motion when lightly on the go pedal. told it may be to much lash in rear end. normal or is something wrong?
  24. F

    backfire

    ever since i tried a colder plug(ngk fr5-1) my car backfires everytime i let off the gas, even when i shift gears. i put a new set of stock plugs in and still the same loud gun shot bang every time i let off the gas.
  25. F

    Y are we letting our Vipers value drop?????

    i think we as viper owners should not let the economy dictatate the value of our cars. i see the prices of vipers dropping more and more. we as owners can dictate what the value of our cars should be. Don't Sell Cheap! have you looked at the prices of supras in the classified lately? since the...

Latest posts

Members online

Total: 649 (members: 7, guests: 642)

Forum statistics

Threads
153,221
Posts
1,682,121
Members
17,715
Latest member
VenomXX

Share this page

Top