All:
As you know, if you are the original buyer of a Gen V Dodge offers a free Viper Track Day with Viper Track Experience. I know several here have attended, and several more are scheduled to attend, at Las Vegas Motor Speedway.
If anyone is interested in sharing a cab or Uber, etc. to...
My Gen V Viper was delivered last Friday. Since I just sold my Gen IV Viper Coupe I thought I would post my initial (150mi.) impressions for those who are considering the purchase of a Gen V. My car is a 2014 Yellow/Black GTS with all of the exterior carbon fiber and the leather package...
Does anyone know the best way to wash or clean the OEM car cover? My car was on the lot for some time and the cover is very dirty, inside and out.
Thanks very much!
Has anyone found a good mount and wire splice device/cord yet for Gen V?
The sucton cup mount that comes with the detector may work if there is a special wire/splice into the mirror for power.
Thanks for your thoughts.
Has anyone changed their shifter ball in a Gen V yet? Is it the same fitting as on a Gen IV?
If and when I close on a Gen V I would like to change it up a bit (while we still have shifters to shift!).
Thanks!
For those of you with ACR Stoptech Rotors (slotted with Black Hats), have you done anyting to maintain the Black Rotor Hats? I noticed that each of mine have some splash marks, etc. or at least are not uniform in appearance, although I have not tried to clean them yet. I have never placed...
If anyone is interested, I have a Set of Gen IV OEM Razor Wheels, Center Caps, Sensors and New Michelin Pilot Cup Sport Tires for Sale. The Wheels are in excellent condition with no curb rash, etc. The Tires were used for three 20-minute HPDE sessons and about 100-200 miles on the street. I...
I thought I would check with the experts!
My '08 has 2 sets of wheels and tires and I am swapping now to break in some other tires. Using just a racing jack I am going one corner at a time. I started on the Driver's front and once I had removed all lugs with the wheel slightly lifted off...
Does anyone have any good suggestions for a padded Lug Nut Socket to avoid damaging both the wheel and the lug nut?
I know about painter's tape around the socket and working on the skill of the nut behind the socket!
Thanks for your input.
This morning I dropped by 12,700 mi. 2008 Gen IV to the Dealer to handle a few items and I asked about any scheduled maintenance. One thing the dealer mentioned was a "coolant flush" which is apparently due at 5 years, but he suggested it given the non-daily use of the car and the fact that it...
The new C & D magazine just arrived and shows many cars "worth waiting for." The photo of the new Gen V Snake is not good! Hopefully this is NOT the Gen V we will see! Let's bring on the Volado!
Hi all!
I am hoping someone in the know can verify different Mopar Part Numbers that will work on Gen IVs. I will start:
1. I received and used Mopar SRT (white color) #05038041 from one Dodge Dealer.
2. Another Dodge Dealer has supplied Mopar (black color) #MO-090, #05281090.
The...
About 6 mos. ago I added new wheels with NEW OEM TPMs for the new wheels. I kept the OEM sensors from my OEM wheels with those factory wheels. I do not think
My wheel installer could not sync the new sensors on the new wheels at the time of install (they tried but could not get it)...
Any recommendations on which supporting vendors have the best deals on extended warranties and which warranties to consider?
The 3-year factory warranty on my '08 is up in April and I am well under in terms of mileage.
Thanks for your thoughts!
I am looking for a set of new OEM Michellin Pilot Sport 2 (non-run flat) for my 2008 Coupe. If anyone knows of any current good discounts, please let me know!
(I have already checked all of the usual places).
Thanks!
I need to replace the front Viper emblem/badge on my Gen IV and was hoping someone could tell me how far down from the top edge of the front fascia (where it meets front edge of the hood) the top of the badge starts? Knowing this will make it much easier to stick the new badge in the correct...
After reviewing the various VCA and other threads and other information on Gen IV Headers and High-Flow Cats, I am just a bit curious about the claimed gains.
The new ACR-X provides a good example. Dodge states that the ACR-X has 640 crank hp/585 crank trq. on 91 octane and 640 crank hp/605...
AHHHHHHHHHHHHGGG!!!!####@@@
Just hit a cube of something in the road--it was dusk, 30 mph, road colored cube of something someone left in the middle of a lane.
The lower level of the front facia is cracked pretty good in the middle and underneath. No other damage is apparent.
So it...
I have a 2008 SRT-10 Coupe and am thinking of changing my OEM Razors for 19/20 wheels. My car is 90%+ street with an ocassional HPDE on street tires. I believe that the wheel/tire size would be the same as OEM based on different tire aspect ratios, etc. and the new wheel/tire combos would...
Has anyone added the 2010 Viper 5th and 6th Gear Ratios to a 2008 Viper yet? (It looks like Gripforce is in this process).
I am curious to know the approximate cost of this mod.
Thanks!
I am taking my '08 Coupe in to have a few things completed and wanted to get an idea of the charges after speaking briefly with the dealer. If possible, let me know your guesses:
1. Swap out intake manifold with Arrow ported intake (both OEM).
2. Change rear differential fluid.
3...
Does anyone have any ideas for adding front and rear downforce to Gen IV Coupes short of the ACR Goodies?
The ACRs are awesome, but I really do not want the giant tail for the 95% street driving my car sees (I only attend an ocassional HPDE on street tires).
Ferrari and others seem to...
Just noticed that the paint on the rear inside of my passenger rear wheel well is blasted to show some of the yellow beneath the paint (my car is GTS blue). It looks like debris thrown from the tire has just taken the paint off.
While it is easy enough to have my guy repaint the area, I am...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.