Search results

  1. F

    What Nitrous System To Install

    I'vedecided to go Nitrous with my built motor. But, I'm not sure what system shouldI go with. I really like the Nitrous Outlet system with the dual throttle platejetting. I would like to know if anyone has any recommendations as to whatNitrous system goes better for the Viper motor in terms of...
  2. F

    Cool Video of 1999 History of The Viper GTSR ALMS Series

    Follow the link for a brief history on the team ORECA Viper GTSR 1999 and 2000 season. They won 16 out of 18 races for the 1999 season in the ALMS series defeating Team Corvette! :headbang: http://www.alms.com/alms-tv/episode/viper-history
  3. F

    Which coil over to choose?

    Does anyone have any recomendation as to which coil over to use? I've narrow my choice as per the following ones: Penske 8300 Kw Variant 2 I like to use it for trac and street driving. Also I would like to lower the factory ride height too. I do not want the car to feel to loose during cornering...
  4. F

    Engine Cooling Temperature

    I have a 2002 GTS. Does anyone know at what temparuture does the engine colling fan turns on? It seems that is taking too long for my cooling fan to turn on automatically. My temparature gauge is reading past the third mark on the 190 degree side before it turns on. :dunno:
  5. F

    Powder Coating Question?

    I was wondering if the Gen II valve covers and intake manifold are powder coated or painted from the factory? :confused:
  6. F

    New Engine Break In

    Hi everyone, I just wanted fine out about some suggestions to properly break-in a new motor build. I have new rods, pistons, rings, bearings, cylinder heads, and cam. I was told to use Pen 30 W break-in oil. How long should I keep this oil in my motor? :confused:
  7. F

    Clutch Suggestions

    I'm in the process of a build for a GEN 2 and need some suggestions for a clutch that will be able to handle about 700 to 900 ft-lbs of torque? I like to have some driveability like the factory clutch. Thanks,
  8. F

    New Engine Build

    Well, I am starting a new engine build with all forge internals. Greg Good is reworking the heads and with his help he has put me in touch with Brian over at Wiseco pistons for some new custom pistons to handle the higher compression and nitrous (thank's Greg) :2tu:. Here is the list of items...
  9. F

    Piston swap for the cream puff

    Hi everyone, I need some suggestions on replacing the stock pistons for some forge ones. First I will keep it N/A and with the stock bore and stroke. I am planning on keeping my stock rods and crank too. I am doing this now due to my engine is down and Greg Good is fixing one of my heads. I am...
  10. F

    When are they going to make a 19" Drag Radials

    I was wondering how many out there would like to have a 19" drag radial :confused: Should we band together and call BF, MT or Hossier to see if they would make them if we pre-order some? I'm ready for a set who else? :eater:
  11. F

    AFCO Coil Overs

    Has anyone used or have tried the AFCO adjustable coil overs on a Viper. I was this last weekend at the Rolex Gran Am of Miami and saw a Ford GT with twin turbos that had a set of AFCO coil overs with the seperate reservoir on it. I went to the website and saw the same coil overs there for...
  12. F

    Squeaky Suspension

    Hey guys & gals, Does anyone here has a squeak in their suspension? Such as a rubber bushing squeak? My 02' GTS always squeaks when I'm getting in and out or when I go slow over speed bumps. Before anyone ask, is not my weight. I only weight 180 lbs. The noise is just sometimes annoying or...
  13. F

    My Oil Lamp Turned On

    Last night while driving my car, I noticed that my oil lamp had turned on but the oil pressure gage was reading fine. Also, it did not illuminate the MIL. Afterwards I shut off the engine and restarted back up again with the oil lamp light not illuminating. :confused: Has this happen to anyone...
  14. F

    Blown Oil Preassure Sending Unit

    I must have very good oil pressure, because I just blew out my oil pressure sending unit on a car that only has 8,500 miles on it. :omg: Has this ever happen to anyone here? What a mess it did. I tell you, I was just crusing around town when suddenly I see my oil pressure gage go to zero. I...
  15. F

    Blown Oil Preassure Sending Unit

    I must have very good oil pressure, because I just blew out my oil pressure sending unit on a car that only has 8,500 miles on it. :omg: Has this ever happen to anyone here? What a mess it did. I tell you, I was just crusing around town when suddenly I see my oil pressure gage go to zero. I...
  16. F

    Chrysler in Bankruptcy, now what?

    Chrysler has just filled for bankruptcy protection today. :( What does this mean for us? Will the value of our cars drop or go up? Should you sell or keep it? Is your warranty in limbo? These are some of the questions that will test our devotion. IMO I do not plan of selling any time soon...
  17. F

    Replacing Your Heat Shields

    Does anyone know if the factory heat shields on a 02' GTS can be replaced with some type of aftermarket exhaust wrap or blanket?:dunno:
  18. F

    Maximum Compression Ratio w/Pump Gas

    I was wondering what would be the maximum compression ratio on 93 octane fuel before you need to start using racing fule? :confused: I have an N/A motor with a 10.66 CR and wanted to increase the CR to around 12:1 CR.
  19. F

    Gas Tank Leak

    I was wondering if anyone had any ideas on repairing a leaking gas tank on a 02' GTS? I found that is leaking at the inlet pipe at the tank, I looks as if there is an o-ring around the inlet pipe? Any suggestions?
  20. F

    Bleed Down Lifters

    Does anyone outhere knows what good after market lifters I can use that wont bleed down like the OEM on my 02' creampuff? I'm installing a set of p&p heads with a high lift cam and I've been told that the factory lifters will not work with the new springs on these heads due to they will...
  21. F

    SRT Brakes for GEN II

    I just completed upgrading my GEN II with SRT calipers and 14" two piece rotors along with the E-Brake and ABS system. Let me know what you think? :nana: http://www.msnusers.com/f2c442dnqsdo6ituds4multmi4/Documents/Pictures/viper%20005.jpghttp://...
  22. F

    first pic post.

    <font color="red"> </font>
  23. F

    SRT brakes for GEN 2

    I just finished installing a set of SRT Brembo calipers with Roe 14" slotted 2-piece rotors for my FE Gen 2. All I can say is, they are great. A much better setup than the stock version. Plus I also was able to install the SRT e-brake with the stock wheels. The total conversion was a little...

Latest posts

Members online

Total: 812 (members: 6, guests: 806)

Forum statistics

Threads
153,198
Posts
1,681,912
Members
17,696
Latest member
Viper123456

Share this page

Top