Search results

  1. G

    How do reset my check engine lite?

    I have an ODBII reader got the code and believe i have fixed the problem, but when i start the car the check engine lite is still on.
  2. G

    Help! I washed my GTS and it runs horrible

    I washed my GTS today, there was some water under the hood, The car is Roe Supercharged and the VEC2 had some water under the unit but not on it. I took the air compressor and blew all the water i could see away, started the car drove it down the street, it drove okay until i got on it a little...
  3. G

    Blew a radiator hose ,need advice

    I have a 2001 GTS mods are as follows, Headers, T&D rollers, Roe super Charger 5lb pulley, Smooth tubes, K&N's. VipAir, B&B exhaust, Random Tech Hi flow cats. Was getting on the gas pretty hard no issues came to a stop sign noticed a little steam coming out of the hood vents- limped it home (few...
  4. G

    Rev Limiter or Valve float?

    I just put some new PS2's on my 2001 GTS, and was going thru the gears from a stop when i was in 2nd gear between 5 and 6K RPM i noticed the power drop off or kind of top out, at first i thought i blew my engine but it ran fine afterwards no oil pressure loss or anything I do have T&D roller...
  5. G

    PENSKE 8100 vs KW Variant 2

    I am fairly new to the suspension world, i purchased a set of KW variant 2 coil overs from a guy on ViperAlley they ended up being Gen3 coilovers the spring rate was way to stiff and the rear fork or whatever the correct name is was to large. I had to use Spacers to install the shocks. after a...
  6. G

    New Liscence plate ideas

    I dont want to sound like a war monger but was thinking of a new personalized lisc plate. Ultimately i want to offend the rice burner competition, I tought of; eatsric, eatrice, etsrice, riceetr, shtsric, and lastly Fat Boy (ultimate devistation?) ant thoughts
  7. G

    Anyone have any used Penske or JRZ's

    Have a 2001 GTS Looking to upgrade my suspension. Cant afford a new set of coil overs, Any recommendations for other suspension mods?
  8. G

    Not Pulling the plug on my Roe!

    Thanks to some help from a couple VCA members I finally got it figured out. After much trial and error my roe did not like my AB's plug wires, But the biggest improvement was changing the Fuel injector connectors- who would of thought? The cars runs great! Anyone needing Dyno tuning in the NW I...
  9. G

    Pulling the plug on my Roe Supercharger

    I purchased this system used from a guy in Texas,(less than 500 miles on it) It was one of the first units produced by Roe with the VEC I, He purchased a VEC II thinking this would be the fix to his many problems. Several hundred dollars later in the computer software, card writer and dyno...
  10. G

    How do i reset my PCM?

    Im not talking about clearing an error code, I have a 2001 GTS with a Roe Supercharger 5lb pully, Roe PCM, Belanger headers, B&B exhaust, T&D rockers, smooth tubes-k&Ns, Vec-II. I am encountering detonation problems between 3 to 4K RPM while accelerating. I have switched to the Roe recommended...
  11. G

    Roe Supercharger Spark Plug selection

    I have a 2001 GTS, Roe Supercharger with 5lb pulley, I had the stock Champion RC12LYC Plugs and was getting major detonation, someone recommended NGK BKR6E plugs which seemed to help a little, I called Dave at Roe Racing he recommended Bosch Super 7527, The guy at the local tuner shop...
  12. G

    Anyone ever polish Gen II Valve covers?

    I am looking at either powder coating or polishing my existing valve covers, was wondering if anybody has done it, what they look like and how difficult the procedure was.
  13. G

    How difficult to change a PCM?

    I have purchased a used Roe Supercharger, I sent the VEC2 Back to roe for inspection/software upgrade. Roe reccomended I change my 2001 stock PCM for one of his Performance PCM's I ended up purchasing the PCM but received no installation instructions, It was recommended I install the new PCM...
  14. G

    Looking for a thread, Roe supercharger pictues

    There was a thread a while back that had a bunch of photos of peoples Roe superchargers on thier cars., I am looking at ideas for poder coating.
  15. G

    Is there a Clear coat of paint over the top of Viper Red?

    Got a rock chip in the roof of my red GTS, going to try to fix it myself by applying touch-up paint until it is built up over the chip then wet sand it flush and polish it out. Dont think i can do this if it has a clear coat. Any suggestions?
  16. G

    Who makes Gen 2 billet valve covers?

    I wanted to put some polished gen3 valve covers on my 2001 GTS, but after looking at the cost of the valve covers Spacers and retro fiting a few parts I think i will skip it. Anyone know who makes Billet valve covers for a gen2? Or have some Polished Gen2 covers for sale?
  17. G

    Will Gen3 Valve covers fit on a gen 2 motor?

    will soon be putting a polished Roe supercharger on my 2001 GTS, know someone selling a pair of polished gen3 valve covers was wondering if they will fit?
  18. G

    Looking for a set of Gen II heads

    I am looking to put a cam and do some headwork on my 02 GTS, Do not want my car out of commission while waiting for the head work to be done. Would consider a set of heads that have been modified. Any recommendations for Head work?
  19. G

    Paxton VS. Roe for a Gen I I car

    I have a 2001 Gts (Creampuff) without having to change pistons, which supercharger will give me more RWHP? Roe 5 to 6.5lb boost, Paxton is something like 8lb? Need help making a decision, I hear a paxton is better for hook up because of some sort of lag, and the Roe is instant power. Any truth...
  20. G

    Are KW variant 2 coil over shocks any good?

    Did KW suspension make coil overs for gen 2 vipers that are quality shocks?
  21. G

    Spark plug boot heat shields with Bellanger Headers

    I am having Bellanger headers put on my 2001 GTS, my Viper tech recommends i do not put the heat shields back on. I purchased some of Ab's high temp plug wires and am worried about the plug boots melting. I have looked at DEI plug boot protectors and am wondering if they work, and what size to...
  22. G

    Koni Shock Upgrades

    I recently saw a post where someone was talking about being able to send your stock Koni shocks back to ? and for a price having them upgraded to single or double adjustable shocks for around $360 a piece. Does anyone know who i would contact for this upgrade?
  23. G

    Need Recomendations for a Radar/Laser Detector

    Was Looking at a Escort Passport SR7 + SR7 Laser detection. Is this difficult to install? can you see the Laser sensors mounted on the vehicle? How does it mount inside the car? Are there better ones out there?
  24. G

    Engine Removal to install new pistons?

    I Have a 2001 GTS without the forged pistons, I eventually would like to supercharge it, but realize its not really worth it with a 5psi pully. I have contemplated swapping motors for one with forged pistons, but that is very costly as well. If i installed aftermarket forged pistons is it...
  25. G

    Can I put a Gen III motor in a Gen II car?

    I am Looking at a gen 3 motor for sale, can i put in a 2001 GTS without having to modify anything?

Latest posts

Members online

Total: 693 (members: 7, guests: 686)

Forum statistics

Threads
153,217
Posts
1,682,052
Members
17,713
Latest member
webironmongery

Share this page

Top