I've sold many clasic cars , the last a 1967 shelby GT500 . Laminating the window sticker will not hurt the value. Just having it is what counts. Remember they have made a lot of vipers compared to the big value collector cars.:drive:
If you don't have the money to get them welded just use JB Weld where the bubbles are coming through and repaint will last just as long and don't wash your car after driving it. Do it while cold.
You'll get more scratches from washing and waxing then running with the bra on. Also helps with stone chips unless you just sit in the driveway and look at your car.
Got the radio out ok. Some confusion about the wiring. The red/white is the hot , the black is the gound. Do I have to do anything with the other wires. The yellow/black,orange, green/red and the pink. The service manual have them going to other things. The new radio has just wiring for amp use...
Going to replace my stock radio. The service manual says to remove the dash but
I thought I read a post that said you just had to remove the panel for shifter and radio cover. Has anyone done this and is there anything to watch for. Thanks
Ran the car again smell decreasing some after shuting down I see some smoke coming out of the exhaust. Need to wait 18 more days so I can get the pipes good and hot. It may be the the egg smell I'm not use too. Thaks for your help.
Exhaust sure sounds good even if its just idleing.
Just installed 3" Roe Racing mufflers & Cats a few weeks ago. Fired car up for about 20 minutes at idle a couple of times , I was wondering how long it takes to get the smell of the oil on system to stop. I can't take it out on the road yet, insurance doesn't come on until April 1( PA.) Is...
Just put ROE hi flow cats and race mufflers on my 94 all stainless. Terrific
sound, Roe will make the pipe between cats and muffler to lenght you want, very helpfull all for around $700 for side exhaust.
Re: 3\" inside diamter pipe for cats and sill mufflers ???
I just did the 3" Roe Cats and mufflers on my 94. Why take the pipe to a muffler shop, just stop at Auto zone and rent their exhaust pipe expander. It cost me $25.00 , that I got back when I returned the tool. You can keep it as long as...
Alot of times its hard to get a tech to work on a car that someone else
has screwed up. It's nice when your car runs well but let the same thing happen to you. I'm sure you won't keep too soft spoken. Ken good luck getting your car running, Both parties have not made out good on this issue, I'd...
I'm thinking about installing ROE 3" cats and 3" racing mufflers on my 94 viper. Does anyone have this setup on their Gen.1. How loud is it and hows the
sound. Thanks.
Good idea you have my support, alot of us were not the orginal owners and cars
were purchased some distance from where we live. I owned a 1967 shelby gt500 and
the shelby club had most of all the window stickers which they gave out.It would well worth a price to get one for our vipers. That show...
Redoing my exhaust system on my 94 viper. I was wondering what is the largest
diameter muffler and cat that will fit on a gen 1. Has anyone put larger then stock and if any problems. I'd like to use the orginal heat shields if I can.
Thanks
If anyone is interested I have a Gen 2 trunk lid already drilled for a mopar
spoiler. Bought this for my gen1 same measurement except the hinge bolts are off. Not thinking instead of making a new hinge plate I had the orginal trunk lid drilled. I'd like $400 for the lid must be picked up, 30...
Burped my 94 today and was watching it idle to see if the fan came on. It took awhile for it to come on. It comes on when the needle almost touchs the yellow
on the temp. gage and takes it to 190 and shuts off back on at the yellow. Is that normal and can you adjust when it comes on. I have 180...
Anyone taking their cars to the mopar nationals at norwalk the weekend of Sept. 15-17. If so where is everyone staying, sure would like to park with other vipers. :2tu:
Two question can you run with only the fog lights, Mine do not seem to come on until headlights are on.
Second question while trying to figure out the above, my fog lights quit working after working toggle switch for fog lights. Checked the fuse #2 was ok
switched it out any ways, no luck. Is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.